GHOST RC - COBRA 8 ACE W / 1408-7000KV MOTOR - NO PREP DRAG COMBO

Castle is thrilled to partner with Ghost RC in releasing the Cobra 8 ACE. The Cobra 8 ACE is built on our Cobra 8 ESC but with enhanced drag racing features and beefed up to handle the extreme conditions of drag racing.It is engineered with cutting-edge technology tailored specifically for1/10th Drag Racing vehicles. The 1408-7000kv was designed from the ground up with the extreme requirements of drag racing in mind. It includes beefed up solder tabs, large 8-gauge wire, and includes a rear endbell with adjustable mechanical timing.

NOTE: Castle Creations does not provide technical support or service on Ghost RC products. Please contact Ghost RC for any questions regarding their products.
Castle does not offer trade-ins for this product as it is not a Castle product.

ESC FEATURES:

• 32-Bit Processing power for smoother motor control and improved response time.
• Enhanced Data Logging includes:
  • Double the maximum sample frequency of older generations.
  • 8x increased logging time of older generations.
  • Data point for ESC electrical motor timing.
  • Data point for acceleration via onboard accelerometer.
  • Looping feature prevents interruptions in data log recording.
  • Ability to download specific sessions.
• Highly adjustable internal BEC. (5.0V - 8.0V adjustable in 0.1V increments)
• Access to tuning options and firmware updates for free with Castle Link V4 USB programmer included with purchase. Now with USB-C connector! (Requires Windows 10 or higher)
• Mounting holes located in bottom of aluminum case for installation into vehicle.
  
  

• Additional Ghost RC specific features include:
  • Upgraded 8 Gauge battery wires
  • Enhanced Start Power
    • Increased tune-ability on how much power the ESC gives the motor to get off the line and out of the prep
    • Start Power Ramp Time - Allows users to adjust how quickly the start power ramps in on launch
    • Start Power Hold Time - Sets how long it holds the start power before moving into boost timing or programmed throttle mode
  • RPM Limiter
    • Allows users to set a maximum motor RPM, reducing rotor failures if driveline components fail.
  • Boost Timing
    • Increases motor timing up to 120° total timing (sensors required)
    • RPM Based or Throttle Percentage based modes
  • Turbo Timing
    • Additional timing that activates after Boost Timing, up to 120° total.
    • Adjustable activation point based on throttle percentage
    • Tunable rate of acceleration based on degrees per second.
  • Programmed Throttle Curve
    • Allows users to set a throttle curve that automatically engages at launch
    • Time based activation that engages at an adjustable throttle input

MOTOR FEATURES:

• Stainless-wrapped rotor
  • Ensures durability and reliability, allowing for high-speed operation.
  • With a maximum RPM of 90,000, this motor is built to handle extreme racing conditions.
• 550-sized can, the motor is compact and lightweight.
• 5mm output shaft
  • Siamese flats provides a secure and durable platform for your 48p or 32p pinions.
• Compatible with 2-3s batteries.
• Adjustable rear endbell
  • Allows timing adjustments from 0° - 40°
• Oversized solder tabs and motor wires
  • Large 8 gauge wire to handle the high demands on drag racing
  • Beefy solder tabs to reduce resistance and increase current capacity

NOTE: Castle Creations does not provide technical support or service on Ghost RC products. Please contact Ghost RC for any questions regarding their products.

An external capacitor pack must be used with the Ghost RC Cobra 8 ACE. Failure to use an external capacitor pack will affect ESC performance and can lead to damage.

WARNING:This product is for advanced users in drag racing applications. Due to the aggressive and abusive nature of drag racing, this product is sold with no warranty.

GHOST RC COBRA 8 ACE COMES WITH: