GHOST RC - 1408 SENSORED MOTOR - 7000kv NO PREP DRAG MOTOR
Product #: 060-0116-00
List Price: USD $169.99 /EA
- Availability: Not available
- Out of Stock
Castle is excited to partner with Ghost RC in offering high performance electronics for the RC Drag Racing market. Ghost RC products are designed and made by Castle to Ghosts requirements based on the extreme demands on RC drag racing.
The 1408- 7000kv motor is based on Castle's proven 4-pole sensored design. This powerful motor is designed to provide even more torque and RPM than the 6000kv series drag racing motors.
NOTE: Castle Creations does not provide technical support or service on Ghost RC products. Please contact Ghost RC for any questions regarding their products.
Castle does not offer trade-ins for this product as it is not a Castle product.
FEATURES:
- Stainless-wrapped rotor
- 550-sized can, the motor is compact and lightweight.
- 5mm output shaft
- Compatible with 2-3s batteries.
- Adjustable rear endbell
- Oversized solder tabs and motor wires
Upgrade your racing experience with the Ghost RC 1408-7000kv motor with adjustable endbell and unleash its power and speed for exhilarating drag racing performance.
| Technical Specs | |
|---|---|
| Input Voltage Range: | 2s-3s LiPo |
| Kv: | 7000 |
| Max. RPM: | 90,000 |
| Size: | Length: 63.8mm Diameter: 36mm |
| Weight (w/wires): | 295g (10.4oz) |
| Shaft Size: | Length: 20mm Diameter: 5mm |
| Mounting Hole Specifications: | M3 @ 25.4mm |
| Cooling Fan: | Optional |
| Connectors: | 6.5mm male Castle Bullet Connectors attached to replaceable 10 gauge wire |
| Items Needed for Operation: | Compatible Electronic Speed Control (ESC) |
| Application Guidelines: | For 1/10th scale No Prep Drag Cars |
| Recommended ESC(s): | Ghost RC Cobra 8 ACE |
| Running Modes: | SmartSense™ (with Castle Sensor capable ESC), Sensored and an ultra-efficient Sensorless mode. |
| Tech Notes: | Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments. |
| Resources |
|---|
| Sensored Motor Quick Start |
This is a high power product with the potential to be very dangerous. Please read the safety information before use. This product may contain chemicals known to the State of California to cause cancer and or birth defects orother reproductive harm.
Motor designed in Olathe, Kansas USA.
Motor manufactured in China.