-B.jpg?fv=40C99AAB6F1120B35E719570E2728FBA "SIDEWINDER 3 WATERPROOF 1:10TH 12V ESC 1406-7700 SENSORED COMBO")
SIDEWINDER 3 WATERPROOF 1:10TH 12V ESC 1406-7700 SENSORED COMBO
Product #: 010-0115-08
List Price: USD $170.95 /EA
- Waterproof : Yes
- Telemetry Capable : No
- Data Logging : No
- Auxiliary Wire : No
- Minimum Input Voltage : 2S
- Maximum Input Voltage : 2S
- Sensored Capable : No
- Recon G6 Certified ESC : No
- ROAR Certified ESC : No
- CRYO-DRIVE : No
- B-Link Compatible : Yes
- Availability: This item is in stock.
Don’t Be Afraid to Get Wet!
Sidewinder 3 with 1406-7700Kv sensored* brushless motor is the perfect waterproof** combo for 1:10 scale on-road vehicles running up to a 2S LiPo***. It sports updated circuitry for faster response time and improved reliability. This combo now comes with our new sensored* motor. While the sensored capabilities of the motor cannot be utilized with the Sidewinder 3, users will benefit as the sensored motor is rebuildable, and this design even allows modelers to replace damaged motor wires. The Sidewinder 3 Combo will give you exceptional response and performance right of the box!
This combo includes a Sidewinder 3 ESC and 1406-7700Kv sensored* motor. The 1406-7700kv motor is a great upgrade for 1/10th scale on-road cars for 2s use. It can also be used in some lighter off-road 1/10th stadium trucks and buggies with conservative gearing. NOT for use in 2WD or 4WD short course trucks.Please refer to our Gearing Chart for recommended motor, battery and gearing for some of the more popular vehicles on the market.
Sidewinder 3 combo includes:- Sidewinder 3 ESC
- Castle 1406 1Y 7700 Kv sensored* motor
- Driver's Ed and Guide Start Guide
- Decal sheet
* Sensored capabilities of the motor cannot be utilized with the Sidewinder 3. If you require sensored operation you will need a sensored ESC like the Mamba X. The Mamba X paired with the same motor can be found here.
*Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit.
***Brushed motors are recommended for rock crawlers (vehicles traveling 3-5mph.) Brushless motors are fine for use with rock racing. If your vehicle is going to be in a bound up situation, very slowly traversing rocks and obstacles, you are running a rock crawler. If you are constantly traveling at 5mph or higher, you have a rock racer.
| Technical Specs | |
|---|---|
| Controller | |
| Input Voltage Range: | 2s - 3s LiPo; 6 - 8 cell NiMH (7700kv motor is limited to 2s) |
| BEC Specifications: | 5.0 volts fixed, 2 amps. |
| Operating Environment: | Waterproof* design allows for use in nearly any environment |
| Brake: | Proportional |
| Reversible: | Yes, but may be disabled for racing. |
| On/Off Switch: | Yes |
| Cooling Fan: | Available, but not included |
| ESC Size: | L: 1.93" (49mm) W: 1.48" (38mm) H: 0.79" (20mm) |
| ESC Weight (w/wires): | 1.96 oz. (55.5 g) |
| Connectors: | 4mm female bullets for motor connection. |
| Items Needed for Operation: | Battery Connector required; Castle 4mm polarized connectors, Dean's Ultra Plug, or Traxxas Power Connector recommended. |
| Product Use Statements: | *Although Sidewinder 3 is waterproof, it is not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC with clean water after exposure to corrosives or dirt. While the controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. |
| Application Guidelines: | 1/10th scale on-road cars for 2s use. Lighter off-road 1/10th stadium trucks and buggies with conservative gearing. NOT for use in 2WD or 4WD short course trucks. Please refer to our Gearing Chart for recommended motor, battery and gearing for some of the more popular vehicles on the market. |
| Recommended Motors: | Combo includes Castle 1406-7700kv motor. |
| Max. Recommended Vehicle Weight: | No more than 4lbs with battery, ready-to-run. |
| Programmability: | Fully programmable Castle feature set using Castle Link USB adapter (sold separately) and freely downloadable Castle Link Windows software or the Castle Link iOS App and a B-LINK Bluetooth Adapter (sold separately). |
| Telemetry Link Capable: | No |
| Tech Notes: | Not all LiPos are created equal, and surge ratings should never be used to determine a pack’s suitability for a brushless application. Use the CONTINUOUS C rating only. Brushless setups frequently hit 100+ amps in peaks. We strongly suggest using 5,000 mAh or larger LiPo cells with a discharge rating of at least 30C (or high quality 25C batteries such as Traxxas® Power Cells®). Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups. |
| Motor Technical Specs | |
|---|---|
| Input Voltage Range: | 2S LiPo |
| Kv: | 7700 |
| Max. RPM: | 100,000 |
| Size: | Length: 49.5mm Diameter: 36mm |
| Weight (w/wires): | 193g / 6.8oz |
| Shaft Size: | Length: 15mm Diameter: 1/8" (3.17mm) |
| Mounting Hole Specifications: | M3 @ 25mm |
| Cooling Fan: | Optional, coming soon! |
| Connectors: | 4mm male Castle Bullet Connectors |
| Application Guidelines: | 1/10th scale on-road cars for 2s use. Lighter off-road 1/10th stadium trucks and buggies with conservative gearing. NOT for use in 2WD or 4WD short course trucks. Please refer to our Gearing Chart for recommended motor, battery and gearing for some of the more popular vehicles on the market. |
| Max. Recommended Vehicle Weight: | Up to 4lbs |
| Tech Notes: | Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the the motor or ESC. |
For support, frequently asked questions, technical documents, and more, visit our support site.This is a high power product with the potential to be very dangerous. Please read the safety information before use. This product may contain chemicals known to the State of California to cause cancer and or birth defects or other reproductive harm.
U.S. Patent # 7400103, 7492122, 7579796, 7740516, 8287328, 8678875, and 8905814 B2 - Other patents pending.
Controller designed, and circuit boards manufactured, in Olathe, Kansas USA.
Controller assembled in Olathe, Kansas USA.
Motor designed in Olathe, Kansas USA.
Motor made in China.
Castle Link Compatible
With the optional Castle Link USB Programming Kit you can use your Windows™ PC to easily program your controller. Adjustable settings include:
- Throttle curve
- Braking curve
- Drag brake
- Auto LiPo cutoff
- Punch Control
- Reverse Type
- Motor Type
Additional Castle Link benefits include:
- Access to all firmware updates, including added features sets released from Castle Engineering, at no charge.
- Intuitive Demo Mode capability.
- Ability to save setup profiles for later use.
- Ability to default ESC to factory settings.
- Ability to download and view data logs (on applicable controllers).
