SENSORED MOTOR: 4-POLE SENSORED BRUSHLESS 1717-1260KV MOTOR

SENSORED MOTOR: 4-POLE SENSORED BRUSHLESS 1717-1260KV MOTOR

$234.95
Skip to product information
SENSORED MOTOR: 4-POLE SENSORED BRUSHLESS 1717-1260KV MOTOR
SENSORED MOTOR: 4-POLE SENSORED BRUSHLESS 1717-1260KV MOTOR

SENSORED MOTOR: 4-POLE SENSORED BRUSHLESS 1717-1260KV MOTOR

060-0082-00
$234.95
The 1717-1260Kv is perfect upgrade for any 1/6th scale vehicles weighing up to 20lbs and running up to 8s LiPo; it is also a great upgrade for drivers looking for a reliable, high torque 8s motor for their 1/8th scale vehicles. 

 

Minimum Input Voltage: 3s
Maximum Input Voltage: 8s
Sensored Capable: Yes
Recon G6 Certified Motor: No
ROAR Certified Motor: No

 

1717-1260Kv Features:

  • Our IMPROVED 4-POLE 12-SLOT design boasts exceptional EFFICIENCY and produces LESS HEAT.
  • Oversized gold-plated solder tabs for LESS RESISTANCE and easy soldering.
  • Our OPTIMIZED design eliminates the need for mechanical timing adjustments. Our sensor alignment method delivers uniform timing and torque in both directions, automatically.
  • REBUILDABLE design allows users to replace front end bell/bearing assembly or rotor/shaft assembly.
  • ROAR standard sensor port and labeled connections.
  • Proudly designed and supported in Kansas, USA. 
  • Backed by Castle Creations 1-YEAR WARRANTY.

Highest Quality Components: 

  • High strength 180°C grade neodymium sintered magnets
  • 13 AWG high strand count wire with silicone insulation
  • 6061-T6 aluminum heatsink can 
  • High quality, temperature-stabilized sensors
  • High-purity, high-temperature copper windings         
  • High RPM NMB oversized bearings
  • Hardened stainless steel shaft     
  • Stacked stator with high quality 0.2mm steel laminations
  • Kevlar wrapped rotor   

Technical Specs

Input Voltage Range: 3s - 8s LiPo 
Kv: 1260
Max RPM: 56,000
Size: Length: 3.35" (85.1mm)
Diameter: 1.87" (47.6mm)
Weight (w/wires):

597.6g (21.08 oz), (548g without wires)
Max Weight:

20lbs
Shaft Size: Diameter: 5mm, Length: 20mm
Mounting Hole Specs: M3 and M4 @ 25.4mm (1.0") Diameter
Connectors: 6.5mm male Castle Bullet Connectors and 10g wire
Cooling Fan: Optional, 011-0162-00
Items Needed for Operation: Compatible Electronic Speed Control (ESC). We recommend the Mamba Monster X 8s.
Product Use Statement: 
  • Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. never exceed 180° F on the the motor or ESC.
  • Do not use mounting screws that extend more than 5mm into the front of the motor as using too long of a screw can result in damage to the motor's winding's and will not be covered by the warranty.
  • The 1717-1260kv has a lower wattage/power rating compared to the 1717-1650kv; as such the 1260kv will run hotter than the 1650kv when geared for the same speed. For higher power applications (IE speed and drag setup), the 1717-1650kv is preferred with appropriate gearing.
Tech Tips:

Running modes: SmartSense™ Sensored and an ultra-efficient Sensorless mode

The 1717-1260Kv is a water resistant design. The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. We recommend applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to instructions for running and maintaining motors in wet environments.

 

Resources 

Castle Creations - 1717-1260Kv Motor Mechanical Drawing

Sensored Motor Quick Start Guide

Maintaining Motors in Wet Conditions

Castle Creations warrants this product to be free from manufacturing defects for a period of one year from date of purchase.

This product may contain chemicals known to the State of California to cause cancer and or birth defects or other reproductive harm.

Product designed in Olathe, Kansas USA.

Related products