SENSORED MOTOR: 1406-2850KV FOUR-POLE BRUSHLESS MOTOR
$104.95
Skip to product information
SENSORED MOTOR: 1406-2850KV FOUR-POLE BRUSHLESS MOTOR
060-0070-00
$104.95
Ideal for 1/10 scale rock crawlers, trail rigs, touring cars, stadium trucks and buggies on 2s-4s with appropriate gearing.
|
Minimum Input Voltage: 2S |
| Maximum Input Voltage: 4S |
| Sensored Capable: Yes |
| Recon G6 Certified Motor: Yes |
| ROAR Certified Motor: No |
Technical Specs
| Input Voltage Range: | 2S - 4S LiPo |
| Kv: | 2850 |
| Max RPM: | 100,000 |
| Size: | Length: 49.5mm Diameter: 36mm |
| Weight (w/wires): | 197g / 6.9oz |
| Shaft Size: | Length: 15mm Diameter: 1/8" (3.17mm) |
| Mounting Hole Specs: | M3 @ 25mm |
| Connectors: | 4mm male Castle Bullet Connectors attached to replaceable 13 gauge wire; includes 210mm length sensored wire. |
| Items Needed for Operation: | Compatible Electronic Speed Control (ESC) |
| Application Guidelines: | Ideal for 1/10 scale rock crawlers, trail rigs, touring cars, stadium trucks and buggies on 2s - 4s with appropriate gearing. |
| Recommended ESCs: | Mamba Micro X2, Mamba X, Cobra 10, Copperhead 10 |
| Cooling Fan: | Optional, 011-0014-00 |
| Max. Recommended Vehicle Weight: | 8lbs when used for low speed/moderate driving style like rock crawling and trail running; 5lbs for more racing and aggressive driving styles. |
|
Product Use Statement: |
Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the the motor or ESC. |
| Running Modes: | SmartSense™ (with Castle Sensor capable ESC), Sensored and an ultra-efficient Sensorless mode. |
| Tech Tips: | Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommends applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to instructions for running and maintaining motors in wet environments. |
The Design: Keeping It Cool
Motor Features
- Our IMPROVED 4-POLE 12-SLOT design boasts exceptional EFFICIENCY and produces LESS HEAT.
- Oversized gold-plated solder tabs for LESS RESISTANCE and easy soldering.
- Our OPTIMIZED design eliminates the need for mechanical timing adjustments. Our sensor alignment method delivers uniform timing and torque in both directions, automatically.
- REBUILDABLE design allows users to replace front end bell/bearing assembly or rotor/shaft assembly.
- ROAR standard sensor port and labeled connections.
- Proudly designed and supported in Kansas, USA.
- Backed by Castle Creations 1-YEAR WARRANTY.
Highest Quality Components
- High strength 180°C grade neodymium sintered magnets
- 13 AWG high strand count wire with silicone insulation
- 6061-T6 aluminum heatsink can
- High quality, temperature-stabilized sensors
- High-purity, high-temperature copper windings
- High RPM NMB oversized bearings
- Hardened stainless steel shaft
- Stacked stator with high quality 0.2mm steel laminations
- Kevlar wrapped rotor
Resources
1406 Motor 2-Pole Equivalent Turn-Count Data Sheet
Sensored Motor Quick Start Guide
1406 Sensored Motor Competitive Testing
BLOG: Sensored vs Sensorless
Castle Creations warrants this product to be free from manufacturing defects for a period of one year from date of purchase.
This product may contain chemicals known to the State of California to cause cancer and or birth defects or other reproductive harm.
Product designed in Olathe, Kansas USA.