SURFACE ESC, MOTOR COMBO: SW 4, 12.6V, 2A BEC, WP SENSORLESS ESC w/1412-2100 5mm SENSORED MOTOR

2s - 3s LiPo; 6 - 8 cell NiMH 

5.0 volts fixed, 2 amps

Waterproof* design allows for use in nearly any environment

Proportional

Yes, but may be disabled for racing.

Yes

30mm fan included

2.08" x 1.50" x 1.28" (52.92mm x 38.05mm x 32.56mm)

2.26 oz (64 grams)

4mm female bullets for motor connection.

Battery Connector required, Castle 4mm polarized connectors, Dean's Ultra Plug, or Traxxas Power Connector recommended.

*Although Sidewinder 4 is waterproof, it is not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC with clean water after exposure to corrosives or dirt. While the controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.

Fully programmable Castle feature set using Castle Link USB adapter (sold separately) and freely downloadable Castle Link Windows software.

Application Guidelines: For short course trucks running on 2s LiPo and weighing up to 6.5lbs. It is a cooling running torque animal for lighter 1/10th scale 2WD stadium trucks and buggies running up to a 3s LiPo.

Not all LiPos are created equal, and surge ratings should never be used to determine a pack’s suitability for a brushless application. Use the CONTINUOUS C rating only. Brushless setups frequently hit 100+ amps in peaks. We strongly suggest using 5,000 mAh or larger LiPo cells with a discharge rating of at least 30C (or high quality 25C batteries such as Traxxas® Power Cells®). Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups.

Length: 62.5mm

Diameter: 36mm  

Length: 21mm

Diameter: 0.197" (5mm)

M3 @ 25mm

Optional, 011-0014-00

Max Recommended Vehicle Weight: 6.5lbs

Ideal for 1:10 scale 2WD and 4WD SC Trucks, Monster Trucks and rock racers

Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the the motor or ESC.

Water Resistant Design: Routine maintenance is recommended after running in wet conditions. Please refer to instructions for running and maintaining motors in wet environments.

The Castle Link Programming Suite is your ticket to creating the perfect setup. To gain access to the host of tuning parameters, simply purchase a Castle Link USB Programmer and download the simple to install software from our website and you are ready to personalize your controller's settings.